The Phase 3 Forest Inventory Program commenced in 1970 and the initial data collection was completed in 1984 as per a 1966 federal-provincial task force recommendation that a provincial forest inventory should be completed before private company timber harvest quotas came up for renewal in 1986. The inventory was initiated by the Alberta Forestry, Lands and Wildlife Department and was intended to facilitate future forest management plans and the revision of annual allowable cuts. The extent of the Phase 3 Forest Inventory reflects the extent of Alberta's Green Area and fringe areas at that time minus three Forest Management Units in the north (A13, F10 and F20), the Cold Lake Air Weapons Range (L9), the Federal Indian Reserves and the Wilderness Areas. Under the Phase 3 Forest Inventory Program, the cover types were interpreted from aerial photography (mainly 1:15 000 black and white) to generate a hardcopy map base. These maps are not available as geo-referenced rectified images or GIS-ready data.

The Phase 2, or Detailed, Forest Inventory is the second provincial level forest inventory conducted in the province of Alberta. The Phase 1 (Broad Scale) Forest Inventory (initiated in 1949 and completed by 1956) preceded the Detailed Inventory. The Phase 2 (Detailed) Forest Inventory was undertaken to cover lands where commercial timber commitments existed that were not inventoried as part of the Phase 1 (Broad Scale) Forest Inventory. The Phase 2 (Detailed) Forest Inventory utilized aerial photography from 1956 to 1966 to capture attribution similar to the Phase 1 (Broad Scale) Forest Inventory but at a more detailed level. A minimum stand size of 16.2 ha (40 acres) was used and the information was largely mapped at a scale of 1:31 680. Detailed information collected through the Phase 2 Inventory included species composition, stand density, stand heights, site class and the maturity or year of stand establishment. Cover type volume tables (CTVT) were developed, each applicable to different regions of the inventory area. Volume estimates were available by: cover type, species, and diameter class. The eastern slopes portion of the province from Township 2 to Township 47 that had never been captured by the Phase 1 (Broad Scale) Forest Inventory was mapped at the scale of 1:15 840. These maps are not available as geo-referenced rectified images or GIS-ready data.

The Phase 3 Forest Inventory Program commenced in 1970 and the initial data collection was completed in 1984 as per a 1966 federal-provincial task force recommendation that a provincial forest inventory should be completed before private company timber harvest quotas came up for renewal in 1986. The inventory was initiated by the Alberta Forestry, Lands and Wildlife Department and was intended to facilitate future forest management plans and the revision of annual allowable cuts. The extent of the Phase 3 Forest Inventory reflects the extent of Alberta's Green Area and fringe areas at that time minus three Forest Management Units in the north (A13, F10 and F20), the Cold Lake Air Weapons Range (L9), the Federal Indian Reserves and the Wilderness Areas. Under the Phase 3 Forest Inventory Program, the cover types were interpreted from aerial photography (mainly 1:15 000 black and white) to generate a hardcopy map base. These maps are not available as geo-referenced rectified images or GIS-ready data.

The Phase 2, or Detailed, Forest Inventory is the second provincial level forest inventory conducted in the province of Alberta. The Phase 1 (Broad Scale) Forest Inventory (initiated in 1949 and completed by 1956) preceded the Detailed Inventory. The Phase 2 (Detailed) Forest Inventory was undertaken to cover lands where commercial timber commitments existed that were not inventoried as part of the Phase 1 (Broad Scale) Forest Inventory. The Phase 2 (Detailed) Forest Inventory utilized aerial photography from 1956 to 1966 to capture attribution similar to the Phase 1 (Broad Scale) Forest Inventory but at a more detailed level. A minimum stand size of 16.2 ha (40 acres) was used and the information was largely mapped at a scale of 1:31 680. Detailed information collected through the Phase 2 Inventory included species composition, stand density, stand heights, site class and the maturity or year of stand establishment. Cover type volume tables (CTVT) were developed, each applicable to different regions of the inventory area. Volume estimates were available by: cover type, species, and diameter class. The eastern slopes portion of the province from Township 2 to Township 47 that had never been captured by the Phase 1 (Broad Scale) Forest Inventory was mapped at the scale of 1:15 840. These maps are not available as geo-referenced rectified images or GIS-ready data.

The Phase 2, or Detailed, Forest Inventory is the second provincial level forest inventory conducted in the province of Alberta. The Phase 1 (Broad Scale) Forest Inventory (initiated in 1949 and completed by 1956) preceded the Detailed Inventory. The Phase 2 (Detailed) Forest Inventory was undertaken to cover lands where commercial timber commitments existed that were not inventoried as part of the Phase 1 (Broad Scale) Forest Inventory. The Phase 2 (Detailed) Forest Inventory utilized aerial photography from 1956 to 1966 to capture attribution similar to the Phase 1 (Broad Scale) Forest Inventory but at a more detailed level. A minimum stand size of 16.2 ha (40 acres) was used and the information was largely mapped at a scale of 1:31 680. Detailed information collected through the Phase 2 Inventory included species composition, stand density, stand heights, site class and the maturity or year of stand establishment. Cover type volume tables (CTVT) were developed, each applicable to different regions of the inventory area. Volume estimates were available by: cover type, species, and diameter class. The eastern slopes portion of the province from Township 2 to Township 47 that had never been captured by the Phase 1 (Broad Scale) Forest Inventory was mapped at the scale of 1:15 840. These maps are not available as geo-referenced rectified images or GIS-ready data.

This series of 1:250 000 scale colour maps covers the provincial extent of Alberta and is comprised of 50 maps that are individually named using the National Topographic System (NTS) map sheet identifier. These maps display: Alberta Township System (ATS), contours (50m intervals), major hydrographic features, municipalities, major roads, railways, and select geo-administrative features (parks, reserves, etc.).

This series of 1:250 000 scale colour maps covers the provincial extent of Alberta and is comprised of 50 maps that are individually named using the National Topographic System (NTS) map sheet identifier. These maps display: Alberta Township System (ATS), contours (50m intervals), major hydrographic features, municipalities, major roads, railways, and select geo-administrative features (parks, reserves, etc.).

This series of 1:250 000 scale colour maps covers the provincial extent of Alberta and is comprised of 50 maps that are individually named using the National Topographic System (NTS) map sheet identifier. These maps display: Alberta Township System (ATS), contours (50m intervals), major hydrographic features, municipalities, major roads, railways, and select geo-administrative features (parks, reserves, etc.).

This series of 1:250 000 scale colour maps covers the provincial extent of Alberta and is comprised of 50 maps that are individually named using the National Topographic System (NTS) map sheet identifier. These maps display: Alberta Township System (ATS), contours (50m intervals), major hydrographic features, municipalities, major roads, railways, and select geo-administrative features (parks, reserves, etc.).