We gathered ocean profiles during the first two floes of the N-ICE2015 ice camp north of Svalbard with IAOOS ocean profilers. Between January and March 2015, four ocean profilers were deployed: two below a full IAOOS platform (500 m long cable) during floe 1, two on an 800 m long instrumented line in a tent-covered testing-hole during floe1 and floe 2. The ocean profilers, from French manufacturer NKE (PROVOR SPI), carried a Seabird SBE41CP CTD (Conductivity, Temperature, Depth) with an Aanderaa 4330 optode for dissolved oxygen (DO). The profilers were set to perform two profiles a day from 500 m upward (800 m from testing hole) starting at 6 am and 6 pm. They provided the first winter data in the region with a total of 138 profiles during floe 1 (January 15- February 21) with 62, 50, and 26 profiles for IAOOS7, IAOOS8, and IAOOS 9, respectively and 16 profiles during floe 2 (February 24 - March 19- IAOOS 11 from testing hole). Following quality control, we retain all the temperature profiles and remove 1% of the salinity profiles. Finally, the accuracy is estimated to be 0.002°C in temperature, and 0.02 g/kg in salinity. Several profiles are missing or incomplete because of high drift speeds (> 0.4 m s-1) impeding the ascent of the profiler. There are no bottle DO measurements during Floe 1 to calibrate the DO data. DO accuracy is estimated comparing the deep values of DO concentration (rather stable at 500m) between the three profilers. A difference of 3 µmol L-1 is observed between IAOOS 8 and 9, and IAOOS 7. An offset of 3 µmol L-1 is then applied to the oxygen data from IAOOS7 and the accuracy of the data is estimated to be at ±3 µmol L-1. The vertical resolution of the processed CTD data is 1 dbar in the upper 400 dbars, 5 dbars from 400 to 550 dbars and 10 dbars from 550 to 850 dbars. The vertical resolution in dissolved oxygen is 2 dbars over all depths. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

As part of the STeP project (STorfjorden Polynya multidisciplinary study), two moorings, M1 and M2, were deployed in Storfjorden (Svalbard) on July 14, 2016 from the French R/V L’Atalante and were recovered one year later, on September 28, 2017, from the French R/V Pourquoi-Pas?. The two moorings, deployed a few hundred meters apart at 78°N and 20°E at a depth of 100m, documented the formation of dense Brine-enriched Shelf Water (BSW).  The moorings included both physical oceanography (PO) and biogeochemistry sensors. The present dataset is composed of PO data only: the 3 components of the currents, backscatter, salinity, temperature and dissolved oxygen. PO sensors on M1, spanning the whole water column, included 6 Seabird SBE37 microcat (CTD),  15 RBR solo (T), and 1 RBR duet (TD) for hydrography, while currents were monitored with a RDI WH 300kHz upward looking ADCP and 1 Nortek Aquadopp underneath. PO sensors on the shorter M2 mooring included 1 Seabird SBE63 (CTD-O2), 1 RBR solo (T) and 1 RBR duo (TD). Data have been calibrated and validated and the different steps of this processing are discussed in the technical report provided with the dataset. Two netcdf4 files are provided for M1: one for hydrography (STEP2016_M1_hydrography.nc), the other one (STEP2016_M1_current.nc)  for currents and backscatter. Only one netcdf4 files (STEP2016_M2_hydrography.nc) is provided for the shorter M2. Temperature and salinity data from SBE sensors have been interpolated on a common time grid with a 20’ time step. Likewise temperature data from RBR are provided on a 30” time grid. A merged SBE-RBR dataset has also been built for increased vertical resolution, providing temperature every 20’. ADCP data are provided on a 100’ time grid. The user is referred to the technical report provided with the dataset for further information on the different fields. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

The two platforms IAOOS 23 and IAOOS 24 were deployed within 600 m from each other at the North Pole from the Russia-operated Barneo ice camp on April 12, 2017. They followed a meandering trajectory, reaching as far as 30°E in the Nansen Basin, before turning back to the western Fram Strait. On both IAOOS 23 and 24, the ocean profiler was a PROVOR SPI (from French manufacturer NKE) equipped with a Seabird SBE41 CTD (Conductivity, Temperature, Depth) and a dissolved oxygen (DO) Aandera 4330 optode. For the first time, the profiler on IAOOS 23 also carried biogeochemical sensors. It featured a bio-optics sensor suite and a submersible ultraviolet nitrate analyzer (SUNA, Satlantic-Seabird Inc.). The bio-optics sensor suite (called Pack Rem A) combines a three-optical-sensor instrument (ECO Triplet, WET Labs Inc.) and a multispectral radiometer (OCR-504, Satlantic Inc.). The present dataset is composed of CTD-DO data from IAOOS 23 and 24, corrected from the thermal lag and the sensor lag, despiked and interpolated vertically every 0.5 m. It also comprises nitrate concentrations from the SUNA and CDOM fluorescence from the WETLabs ECO sensor on IAOOS 23. Other biogeochemical data will be added to this dataset. The profilers were set to perform two upward profiles a day from 250 m (IAOOS 23) and 350 m (IAOOS 24) upward starting at approximately 6 am and 6 pm. They provided a unique 8-month long dataset, gathering a total of 793 profiles of the temperature, salinity and oxygen (upper 350m) and 427 profiles of CDOM and nitrates concentrations (upper 250m).   Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.