Contact for the resource

Laboratory of Oceanography and Climate, Experiments and numerical Approaches

24 record(s)
 
Type of resources
Available actions
Topics
Keywords
Contact for the resource
Provided by
Years
Formats
Resolution
From 1 - 10 / 24
  • Categories  

    As part of the STeP project (STorfjorden Polynya multidisciplinary study), two moorings, M1 and M2, were deployed in Storfjorden (Svalbard) on July 14, 2016 from the French R/V L’Atalante and were recovered one year later, on September 28, 2017, from the French R/V Pourquoi-Pas?. The two moorings, deployed a few hundred meters apart at 78°N and 20°E at a depth of 100m, documented the formation of dense Brine-enriched Shelf Water (BSW).  The moorings included both physical oceanography (PO) and biogeochemistry sensors. The present dataset is composed of PO data only: the 3 components of the currents, backscatter, salinity, temperature and dissolved oxygen. PO sensors on M1, spanning the whole water column, included 6 Seabird SBE37 microcat (CTD),  15 RBR solo (T), and 1 RBR duet (TD) for hydrography, while currents were monitored with a RDI WH 300kHz upward looking ADCP and 1 Nortek Aquadopp underneath. PO sensors on the shorter M2 mooring included 1 Seabird SBE63 (CTD-O2), 1 RBR solo (T) and 1 RBR duo (TD). Data have been calibrated and validated and the different steps of this processing are discussed in the technical report provided with the dataset. Two netcdf4 files are provided for M1: one for hydrography (STEP2016_M1_hydrography.nc), the other one (STEP2016_M1_current.nc)  for currents and backscatter. Only one netcdf4 files (STEP2016_M2_hydrography.nc) is provided for the shorter M2. Temperature and salinity data from SBE sensors have been interpolated on a common time grid with a 20’ time step. Likewise temperature data from RBR are provided on a 30” time grid. A merged SBE-RBR dataset has also been built for increased vertical resolution, providing temperature every 20’. ADCP data are provided on a 100’ time grid. The user is referred to the technical report provided with the dataset for further information on the different fields. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

  • Categories  

    The mooring was deployed on 15 September 2017 from Norwegian Research Vessel Lance at 80.6°N and 7.26°E (depth of 730 m) in the Yermak Pass over the Yermak Plateau north of Svalbard. It comprised 3 instruments: an upward-looking RDI 75kHz, a Long Ranger Acoustic Doppler Current Profiler (ADCP) at 340 m with 16 m vertical resolution (25 bins of 16 m each) and a 2-hour sampling time; a Seabird SBE37 measuring temperature, salinity and pressure at 348 m with 10-minute sampling time; and an Aquadopp current meter at 645 m with a 2-hour sampling time. The mooring was retrieved on the 19 July 2020 by Norwegian Icebreaker K.V. Svalbard. The present dataset features: (i) the ADCP 50-hour smoothed daily velocities, conservative temperature and pressure time series interpolated every 10 meters within the 20-330m layer, (ii) the Aquadopp 50-hour smoothed daily velocities and pressure time series at 645 m; and (iii) the SBE37 50-hour smoothed daily conservative temperature, absolute salinity and pressure time series at 348 m. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

  • Categories  

    This data set includes CTD-O2 and LADCP data from the 46 stations occupied in Storfjorden and Storfjordrenna during the STEP cruise in July 2016 onboard R/V l'Atalante. Hydrographic data are provided in the form of Seabird ascii format (cnv), with two files per station (up and down). The data set also includes  underway S-ADCP data provided in netcdf format. Sensor metadata: CTD data were collected with a Seabird SBE 911+ probe. Dissolved oxygen data were collected with a Seabird SBE43 probe attached to the rosette. Additional data include fluorescence (Chelsea Aqua3) and transmission (WET labs C-Star).LADCP data were collected with a pair of  300 kHz Workhorse Sentinel from RD Instruments mounted on the rosette. Shipborne-ADCP data were collected with the  150 kHz Ocean Surveyor (RD Instruments)  mounted on the hull of R/V L'Atalante. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

  • Categories  

    The mooring was deployed on 25 July 2007 from the R/V Haakon Mosby at 80.601°N, 7.119°E (depth of 745 m) in the Yermak Pass over the Yermak Plateau north of Svalbard. It comprised an upward-looking RDI 75kHz Long Ranger Acoustic Doppler Current Profiler (ADCP) at 585 m with 16 m vertical resolution and a 1hour sampling time, and an ocean profiler on a taut cable between 130 and 530 m. The mooring was recovered on 23 September 2008 by the K/V Svalbard. The dataset is composed of the raw data from the ADCP, after declination correction. A white shaded zone is visible in the data between 380 and 500 m depth throughout the time series. It corresponds to the reflection of the acoustic bins on the profiler stuck on the cable.

  • Categories  

    In April 2017, two Ice Atmosphere Arctic Ocean Observing System platforms (IAOOS 23 and IAOOS 24) were deployed near the North Pole. Over the next 8 months, they meandered southwards with the ice in the Transpolar Drift, collecting measurements in the upper 250 m of Amundsen Basin, Nansen Basin and Fram Strait. The ocean profilers are PROVOR SPI (from French manufacturer NKE), which includes a Seabird SBE41 CTD (Conductivity, Temperature, Depth) and a dissolved oxygen (DO) Aandera 4330 optode. IAOOS 23 also featured a bio-optics sensor suite and a submersible ultraviolet nitrate analyzer (SUNA, Satlantic-Seabird Inc.). The bio-optics sensor suite (called Pack Rem A) combines a three-optical-sensor instrument (ECO Triplet, WET Labs Inc.) and a multispectral radiometer (OCR-504, Satlantic Inc.). The present dataset is composed of chlorophyll-a fluorescence, backscatter, irradiances (at 412, 490 and 555 nm), photosynthetically active radiation (PAR), nitrate and colored-dissolved organic matter data from the IAOOS 23 platform, as well as composites of absolute salinity, conservative temperature and apparent oxygen utilization data from both profilers. The profilers were set to perform two upward profiles a day from 250 m starting at approximately 6 am and 6 pm. In this dataset, chlorophyll-a, PAR and irradiances were corrected with a shift to set dark values to zero. Nitrate was interpolated vertically every 5 m, and all other parameters were interpolated vertically every 0.5 m. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

  • Categories  

    We report continuous observations in the high Arctic (north of 84°N) over the full 2013 summer season at two nearby sites with distinct initial snow depth, ice thickness and altitude with respect to the local ice topography. The two sites subject to similar atmospheric conditions that did not favor strong ice melt showed a contrasted evolution. One site, with an initial thin sea ice (1.40 m) at a low location of the floe, witnessed the formation of a spectacular 1.20 m-deep melt pond, a pond-enhanced erosion of the ice surface and a sudden pond drainage into the ocean. Then, the outpoured fresh water rapidly froze, heated the old ice from below and also acted as a temporary shield from the ocean heat flux while it was progressively ablated through dissolution. Eventually, the site almost recovered its initial ice thickness. In contrast, the other site, with an initial thicker sea ice (1.75 m) at a high location of the floe, did not support any significant melt water and underwent over 0.5 m of continuous basal ablation. The two sites witnessed formation of superimposed and interposed ice. Sea-ice survived summer melt at the two sites which entered the refreezing season with similar snow and ice thicknesses. For the first time, processes associated with the formation of a deep melt pond and subsequent false bottom evolution are continuously documented with ice mass balance instruments.  Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

  • Categories  

    The mooring was deployed on 15 September 2017 from Norwegian Research Vessel Lance at 80.6°N and 7.26°E (depth of 730 m) in the Yermak Pass over the Yermak Plateau north of Svalbard. It comprised 3 instruments: an upward-looking RDI 75kHz, a Long Ranger Acoustic Doppler Current Profiler (ADCP) at 340 m with 16 m vertical resolution (25 bins of 16 m each) and a 2-hour sampling time; a Seabird SBE37 measuring temperature, salinity and pressure at 348 m with 10-minute sampling time; and an Aquadopp current meter at 645 m with a 2-hour sampling time. The mooring was retrieved on the 19 July 2020 by Norwegian Icebreaker K.V. Svalbard. The present dataset features: The ADCP 50-hour high pass filtered velocities and  the Aquadopp 50-hour high pass filtered velocities. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

  • Categories  

    The two platforms IAOOS 23 and IAOOS 24 were deployed within 600 m from each other at the North Pole from the Russia-operated Barneo ice camp on April 12, 2017. They followed a meandering trajectory, reaching as far as 30°E in the Nansen Basin, before turning back to the western Fram Strait. On both IAOOS 23 and 24, the ocean profiler was a PROVOR SPI (from French manufacturer NKE) equipped with a Seabird SBE41 CTD (Conductivity, Temperature, Depth) and a dissolved oxygen (DO) Aandera 4330 optode. For the first time, the profiler on IAOOS 23 also carried biogeochemical sensors. It featured a bio-optics sensor suite and a submersible ultraviolet nitrate analyzer (SUNA, Satlantic-Seabird Inc.). The bio-optics sensor suite (called Pack Rem A) combines a three-optical-sensor instrument (ECO Triplet, WET Labs Inc.) and a multispectral radiometer (OCR-504, Satlantic Inc.). The present dataset is composed of CTD-DO data from IAOOS 23 and 24, corrected from the thermal lag and the sensor lag, despiked and interpolated vertically every 0.5 m. It also comprises nitrate concentrations from the SUNA and CDOM fluorescence from the WETLabs ECO sensor on IAOOS 23. Other biogeochemical data will be added to this dataset. The profilers were set to perform two upward profiles a day from 250 m (IAOOS 23) and 350 m (IAOOS 24) upward starting at approximately 6 am and 6 pm. They provided a unique 8-month long dataset, gathering a total of 793 profiles of the temperature, salinity and oxygen (upper 350m) and 427 profiles of CDOM and nitrates concentrations (upper 250m).   Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

  • Categories  

    A mooring, equipped with a CTD sensor (SBE37) at 350 m depth, was deployed in the Yermak Pass on the 24 September 2017 from the R/V Lance. The mooring was recovered in summer 2020 from K/V Svalbard. The present dataset provides 10-day smoothed time series of daily conservative temperature (CT, °C), absolute salinity (SA, g/kg) and pressure (db) recorded by the SBE37 sensor, from the 24 September 2017 to the 31 May 2020. The mooring was located at 80.63°N, 6.88°E. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

  • Categories  

    We gathered ocean profiles during the first two floes of the N-ICE2015 ice camp north of Svalbard with IAOOS ocean profilers. Between January and March 2015, four ocean profilers were deployed: two below a full IAOOS platform (500 m long cable) during floe 1, two on an 800 m long instrumented line in a tent-covered testing-hole during floe1 and floe 2. The ocean profilers, from French manufacturer NKE (PROVOR SPI), carried a Seabird SBE41CP CTD (Conductivity, Temperature, Depth) with an Aanderaa 4330 optode for dissolved oxygen (DO). The profilers were set to perform two profiles a day from 500 m upward (800 m from testing hole) starting at 6 am and 6 pm. They provided the first winter data in the region with a total of 138 profiles during floe 1 (January 15- February 21) with 62, 50, and 26 profiles for IAOOS7, IAOOS8, and IAOOS 9, respectively and 16 profiles during floe 2 (February 24 - March 19- IAOOS 11 from testing hole). Following quality control, we retain all the temperature profiles and remove 1% of the salinity profiles. Finally, the accuracy is estimated to be 0.002°C in temperature, and 0.02 g/kg in salinity. Several profiles are missing or incomplete because of high drift speeds (> 0.4 m s-1) impeding the ascent of the profiler. There are no bottle DO measurements during Floe 1 to calibrate the DO data. DO accuracy is estimated comparing the deep values of DO concentration (rather stable at 500m) between the three profilers. A difference of 3 µmol L-1 is observed between IAOOS 8 and 9, and IAOOS 7. An offset of 3 µmol L-1 is then applied to the oxygen data from IAOOS7 and the accuracy of the data is estimated to be at ±3 µmol L-1. The vertical resolution of the processed CTD data is 1 dbar in the upper 400 dbars, 5 dbars from 400 to 550 dbars and 10 dbars from 550 to 850 dbars. The vertical resolution in dissolved oxygen is 2 dbars over all depths. Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.