The lightweight web app shows the locations of several river and lake stations where water levels and/or flow data are collected in Manitoba. The web map shows the locations of several river and lake stations where water levels and/or flow data are collected. When you click on a location on this map, a pop-up box will appear.  The pop-up box contains various water level and/or flow data, as well as forecast information. Please note these conditions regarding the information contained in the pop-up boxes:The information on this map is updated daily at 1:00 pm during the spring runoff period, based on water levels and flows collected earlier in the morning.  The water levels and flows should be considered preliminary data as they could be affected by ice, wind, or monitoring equipment malfunctions. While the department undertakes due diligence in utilizing this data, final quality control checked data is published by Water Survey of Canada, our main data provider, after the spring runoff.  Forecasted peak information is the most recent data available. Forecasts are evaluated daily and any updates are included in the Daily Flood Sheets and the Flood Report; both of these are available on the Manitoba Flood Forecast website. If the updated forecasts will not be available until later in the afternoon, the forecasted peak information in the pop-up boxes will be from yesterday’s Daily Flood Sheets.Pop-up boxes include the following information: Station Name: station name where the water level and/or flow data are collected Station ID: unique identifier for the station Flood Alert: indicates if the current water level is over the flood stage, over the river bank but below the flood stage, or below the river bank.  Last Update: date that water level and/or flow data was collected  Flow: measured or calculated flow in cubic feet per second  Level: measured water level in feet  Forecasted Flow: the forecasted peak flow in cubic feet per second Forecasted Level: the water level at the forecasted peak in feet Peak Date: date when the peak is forecasted to occur Flood Stage (dike level) (ft): the water level (ft) at which flow overtops community flood protection dike-structures Bankfull Capacity - flow (cfs): the approximate flow (in cubic feet per second) when the water level is at the top of the bank  Bankfull Capacity - level (ft): the water level (in feet)  when the water is at the top of the bank Reference Years:  years when the peak water levels were similar to the forecasted peak water level this year“Flood Alert” definitions:  Flood Warning: A flood warning is issued when water levels are above or expected to be above channel capacity within the next 24 hours, resulting in minor to major flooding. Water is beyond the channel capacity and expected to flood adjacent areas, agricultural fields and/or infrastructure in the area.  High Water Advisory / Flood Watch: A high water advisory is issued when water levels are above seasonal levels. A High Water Advisory can be an early indicator for conditions that may develop into a Flood Watch. A flood watch is issued when water levels are nearing channel capacity, but not expected to reach channel capacity within the next 24 hours. Minor to no flooding is expected at these levels, but water may begin to overflow into nearby low-lying marshland, parkland or floodplain areas with little to no impact. A Flood Watch can be an early indicator for conditions that may develop into a Flood Warning.   Above Community Flood Protection Level: Water levels are above or projected to be above the community dike levels within 24 hours, causing major flooding.

This line dataset was created to provide a record of the designated Provincial Waterways in Manitoba. This database contains lines showing the locations of provincial waterways, such as drains, diversions, detention basins, floodways, dams and reservoirs. This dataset was created by digitizing high-resolution imagery of the water features and by digitizing the titled Water Control Work plans associated with the features for drains which have been designated as provincial waterways by Order-in-Council.This dataset was created to provide a record of the designated Provincial Waterways in Manitoba and was intended for use in administering Provincial Waterways Authorizations. Provincial Waterways are designated by Order-in-Council and are under the administration and control of Manitoba Infrastructure (MI) through the Water Resource Administration Act.

This polygon dataset was created to provide a record of the designated Provincial Waterways in Manitoba. This database contains lines and polygons showing the locations of provincial waterways, such as drains, diversions, detention basins, floodways, dams and reservoirs. This dataset was created by digitizing high-resolution imagery of the water features and by digitizing the titled Water Control Work plans associated with the features for drains which have been designated as provincial waterways by Order-in-Council.This dataset was created to provide a record of the designated Provincial Waterways in Manitoba and was intended for use in administering Provincial Waterways Authorizations. Provincial Waterways are designated by Order-in-Council and are under the administration and control of Manitoba Infrastructure (MI) through the Water Resource Administration Act.

This line and polygon dataset was created to provide a record of the designated Provincial Waterways in Manitoba. This database contains lines and polygons showing the locations of provincial waterways, such as drains, dikes, diversions, detention basins, floodways, dams and reservoirs. This dataset was created by digitizing high-resolution imagery of the water features and by digitizing the titled Water Control Work plans associated with the features for drains which have been designated as provincial waterways by Order-in-Council. This dataset was created to provide a record of the designated Provincial Waterways in Manitoba and was intended for use in administering Provincial Waterways Authorizations. Provincial Waterways are designated by Order-in-Council and are under the administration and control of Manitoba Infrastructure (MI) through the Water Resource Administration Act.

This line and polygon dataset was created to provide a record of the designated Provincial Waterways in Manitoba. This database contains lines and polygons showing the locations of provincial waterways, such as drains, dikes, diversions, detention basins, floodways, dams and reservoirs. This dataset was created by digitizing high-resolution imagery of the water features and by digitizing the titled Water Control Work plans associated with the features for drains which have been designated as provincial waterways by Order-in-Council. This dataset was created to provide a record of the designated Provincial Waterways in Manitoba and was intended for use in administering Provincial Waterways Authorizations. Provincial Waterways are designated by Order-in-Council and are under the administration and control of Manitoba Infrastructure (MI) through the Water Resource Administration Act.

This line and polygon dataset was created to provide a record of the designated Provincial Waterways in Manitoba. This database contains lines and polygons showing the locations of provincial waterways, such as drains, dikes, diversions, detention basins, floodways, dams and reservoirs. This dataset was created by digitizing high-resolution imagery of the water features and by digitizing the titled Water Control Work plans associated with the features for drains which have been designated as provincial waterways by Order-in-Council. This dataset was created to provide a record of the designated Provincial Waterways in Manitoba and was intended for use in administering Provincial Waterways Authorizations. Provincial Waterways are designated by Order-in-Council and are under the administration and control of Manitoba Infrastructure (MI) through the Water Resource Administration Act.

This dataset contains points showing the locations of the Manitoba Infrastructure's (MI) approved, new, and continuing capital projects for the year 2021/2022. Examples of MI's capital projects are asphalt surface treatment, grading, bituminous rehabilitation, concrete reconstruction, culvert jacking, intersection improvement, structures improvement, traffic signal improvements, and traffic safety improvements. This dataset contains points showing the locations of the capital projects such as asphalt surface treatment, grading, bituminous rehabilitation, concrete reconstruction, culvert jacking, intersection improvement, structures improvement, traffic signal improvements, and traffic safety improvements. This dataset was created by digitizing high-resolution imagery of Manitoba road network, bridge sites, and culvert locations. The details of the capital projects are available as attributes of the dataset. Fields included ( Alias (Field Name): Field description.) ObjectID (OBJECTID): Sequential unique whole numbers that are automatically generated Project # (Project__):  A unique ID assigned to a project by MI Capital Project Team. Hwy (Hwy): The highway number where the project is located.  Location Description (Location_Description): A detailed description of the project location. Project Distance in km (km): The physical length of the project Project Type (Project_Type): A particular category assigned to the project based on the nature of work. Total Project Status (Total_Project_Status): Current total status of the project (e.g. new, continue, etc.) Construction Project Status (Construction_Project_Status): Current phase of project (e.g. construction phase, engineering design phase, etc.) Anticipated Construction Start Date (Anticipated_Construction_Start_): The expected construction start date for the project. Anticipated Construction Complete Date (Anticipated_Construction_Comple): The expected construction completion date for the project. Municipality Name (MUNI_NAME): The name of the municipality where the project is located. Department Program (Department_Program): The name of the MI department responsible for the project. This dataset is used in Manitoba Infrastructure Projects an interactive map that shows Manitoba infrastructure's new, approved, and continuing capital project locations.

A Manitoba Infrastructure Capital Projects information Dashboard that shows new, approved, and continuing projects for the years 2021/2022. The dashboard is an interactive tool that gives location information on a map, project information in a list, and detailed information in a pop-up for any project included in the data. This dashboard displays information for Manitoba Infrastructure (MI) Projects.   MI's Capital Projects are shown on an interactive map. Project summaries are listed in an interactive list. Project details are accessed through information boxes called popups. You will see a popup when you click on a project location.  Popup Information   Project Number:  A unique ID assigned to a project by MI capital projects team.  Highway Number: The highway where the project is located.  Location Description: A detailed description of the project location.  Project Length: A numerical distance length of the project.  Project Type: A particular category assigned to the project depending on what type of work is assigned to the project.  Project Status: Current phase of project  Anticipated Start Date: The expected construction start date  Anticipated Complete Date: The expected construction completion date  Municipality Name: The name of the municipality where the project is located. The map and list can be filtered by highway number, project status, project type and municipality.  The detailed information for MI capital projects is available here. 

An accurate depiction of road structure construction history of the Highway Network in Manitoba. Manitoba Infrastructure --> Highway Engineering--> Highway Planning and Design (HPD) manages the Highway Inventory System (HIS). This system tracks road structure and construction history of Manitoba's Road Network. Published annually, this layer aids provincial engineers in planning and managing construction projects, both present and future. The department’s linear referencing system (LRS) uses control sections as a linear referencing method (LRM). These control section are further divided into subsections. It is on these subsections that road structure and construction history are tracked in the highway inventory system database. This is the first year that HPD is making its annual HIS export available to the public. Please note that this feature layer primarily contains only the roads Manitoba Infrastructure is responsible for, i.e. Provincial Trunk Highways, Provincial Roads and Access Roads. It does not include municipal mile or grid roads. However, you may also see Earth Roads (under construction) or Other roads (such as those passing through national parks and are federal responsibility). A newer version of this data is available: Manitoba Highway Inventory 2018. Field List - FIELD NAME (Field Alias (i.e. display name)) in parenthesis) OBJECTID (OBJECTID) - Sequential, unique whole numbers are automatically generated. SHAPE (SHAPE) - A field to hold geometry information. ID (ID) - Oracle's unique identifier CS_ID (Control Section ID) - Non unique identifier linking segment to its respective control section. For example, a control section may have numerous geometry segments and each will have the same CS_ID. CS_KEY (Control Section Key) - An information rich key containing Region (two digits), Road Number (three digits), Section number (three digits), the Road Type (one character), and direction of travel (one character). SS_ID (Subsection ID) - Control Sections are further divided into Subsections. This is the subsection ID field. REGION_NO (MI Region) - The Manitoba Infrastructure region the segment is in Regions 1-5. ROAD_NO (Road Number) - The road number. Note co-routes will have the lesser highway number. SECTION_NO (Section Number) - The section number from the CS_KEY. ROAD_TYPE (Road Type) - H = Highway, E = Earth Road, and O= 'Other" road (such as through a national park because the road is not a responsibility of MI.) ROAD_DIRECTION (Road Direction) - A = ahead direction on a divided highway (i.e. following the digitizing direction), B = Back direction on a divided highway (i.e. against the digitizing direction, and U= an undivided highway. START_KM (Start Kilometre (KM)) - Start KM, is the start of the sub section within a control Section. This is part of the linear referencing method used for dynamic segmentation. END_KM (End Kilometre (KM)) - End KM is the end of the sub section within a Control Section. This is part of the linear referencing method used for dynamic segmentation. LENGTH_KM (Length (KM)) - End Kilometre minus the Start Kilometre. SECTION_DESC (Subsection Description) - A text description of where the subsection starts and ends. ROAD_TYPE_DESC (Road Type Description) - An unabbreviated version of Road Type above. ROAD_DIRECTION_DESC (Road Direction Description) - An unabbreviated version of Road Direction above. FUNCTIONAL_CLASS (Functional Class) - Functional Class: Expressway, Primary Arterial, Secondary Arterial and Collector DIVIDED_STATUS (Divided Status) - Highway is divided or undivided. LANES (Number of Lanes) - The number of lanes the road has. MEDIAN_TYPE (Median Type) - Type of median: Raised Median, Depressed Median, Flush Median, Barrier and No Median. MEDIAN_WIDTH (Median Width (m)) - The width of the median, in metres. ROW_WIDTH (Row Width (m)) - The total width of the right-of-way in metres. SUBGRADE_WIDTH (Subgrade Width (m)) - The width of the earth embankment in metres. REGRADE_YEAR (Re-grade Year) - The year the road was last regraded. REGRADE_DESCRIPTION (Re-grade Description) - Description of what re-grading was done. OUTSIDE_SHLDR_TYPE (Outside Shoulder Type) - Type of outside shoulder: AST, Curbed, Fully Paved, Gravel, No Shoulders and N/A. OUTSIDE_SHLDR_WIDTH (Outside Shoulder Width (m)) - The width of the outside shoulder in metres. OUTSIDE_PAVED_WIDTH (Outside Paved Width (m)) - The width of the paved surface of the outside shoulder in metres. INSIDE_SHLDR_TYPE (Inside Shoulder Type) - Type of inside shoulder: Curbed, Fully Paved, Gravel, No Shoulders and N/A. INSIDE_SHLDR_WIDTH (Inside Shoulder Width (m)) - The width of the inside shoulder in metres. INSIDE_PAVED_WIDTH (Inside Paved Width (m)) - The width of the paved surface of the inside shoulder in metres. SURFACE_TYPE (Surface Type) - The type of surfacing on the road: A Base, AST, Bituminous (Bpm), Bituminous B, Bituminous C, C Base, Concrete, Granular, Reclaimed Asphalt Pavement and Road Mix SURFACE_WIDTH (Surface Width (m)) - The surface width is the width of the driving lanes. SURFACE_DEPTH (Surface Depth (mm)) - Thickness of the surface layer (mm). SURFACE_YEAR (Surface Year) - The year the surface was constructed. BASE_1 (Base Layer 1) - 1st subsurface layer. 1 = present, 0 = not present BASE_1_TYPE (Base Layer 1 Type) - Material type of 1st subsurface layer of the road structure. BASE_1_DEPTH (Base Layer 1 Depth (mm)) - Thickness of 1st subsurface layer of road structure in mm. BASE_1_YEAR (Base Layer 1 Year) - Year materials placed or modified for 1st subsurface layer. BASE_2 (Base Layer 2) - 2nd subsurface layer. 2 = present, 0 = not present BASE_2_TYPE (Base Layer 2 Type) - Material type of 2nd subsurface layer of road structure. BASE_2_DEPTH (Base Layer 2 Depth (mm)) - Thickness of 2nd subsurface layer of road structure in mm. BASE_2_YEAR (Base Layer 2 Year) - Year materials placed or modified for 2nd subsurface layer. BASE_3 (Base Layer 3) - 3rd subsurface layer. 3 = present, 0 = not present BASE_3_TYPE (Base Layer 3 Type) - Material type of 3rd subsurface layer of road structure. BASE_3_DEPTH (Base Layer 3 Depth (mm)) - Thickness of 3rd subsurface layer of road structure in mm. BASE_3_YEAR (Base Layer 3 Year) - Year materials placed or modified for 3rd subsurface layer. BASE_4 (Base Layer 4) - 4th subsurface layer. 4 = present, 0 = not present BASE_4_TYPE (Base Layer 4 Type) - Material type of 4th subsurface layer of road structure. BASE_4_DEPTH (Base Layer 4 Depth (mm)) - Thickness of 4th subsurface layer of road structure in mm. BASE_4_YEAR (Base Layer 4 Year) - Year materials placed or modified for 4th subsurface layer. BASE_5 (Base Layer 5) - 5th subsurface layer. 5 = present, 0 = not present BASE_5_TYPE (Base Layer 5 Type) - Material type of 5th subsurface layer of road structure. BASE_5_DEPTH (Base Layer 5 Depth (mm)) - Thickness of 5th subsurface layer of road structure in mm. BASE_5_YEAR (Base Layer 5 Year) - Year materials placed or modified for 5th subsurface layer. BASE_6 (Base Layer 6) - 6th subsurface layer. 6 = present, 0 = not present BASE_6_TYPE (Base Layer 6 Type) - Material type of 6th subsurface layer of road structure. BASE_6_DEPTH (Base Layer 6 Depth (mm)) - Thickness of 6th subsurface layer of road structure in mm. BASE_6_YEAR (Base Layer 6 Year) - Year materials placed or modified for 6th subsurface layer. BASE_7 (Base Layer 7) - 7th subsurface layer. 7 = present, 0 = not present BASE_7_TYPE (Base Layer 7 Type) - Material type of 7th subsurface layer of road structure. BASE_7_DEPTH (Base Layer 7 Depth (mm)) - Thickness of 7th subsurface layer of road structure in mm. BASE_7_YEAR (Base Layer 7 Year) - Year materials placed or modified for 7th subsurface layer.TERRAIN_TYPE (Terrain Type) - General terrain conditions: Flat, Rolling and Rugged. CONSTRUCTION_STATUS (Construction Status) - Construction completed or carried over. UPDATED_YYYYMMDD (Updated Date) - Date the record was updated. SHAPE_Length (Length) - Segment length, automatically generated by ArcGIS.

An accurate depiction of road structure construction history of the Highway Network in Manitoba. Manitoba Infrastructure, Highway Engineering, Highway Planning and Design (HPD) manages the Highway Inventory System (HIS). This system tracks road structure and construction history of Manitoba's Road Network. Published annually, this layer aids provincial engineers in planning and managing construction projects, both present and future. The department’s linear referencing system (LRS) uses control sections as a linear referencing method (LRM). These control section are further divided into subsections. It is on these subsections that road structure and construction history are tracked in the highway inventory system database.Please note that this feature layer primarily contains only the roads Manitoba Infrastructure is responsible for, i.e. Provincial Trunk Highways, Provincial Roads and Access Roads. It does not include municipal mile or grid roads. However, you may also see Earth Roads (under construction) or Other roads (such as those passing through national parks and are federal responsibility).Fields included (Alias (Field Name): Field description.) OBJECTID (OBJECTID): Sequential, unique whole numbers are automatically generated. SHAPE (SHAPE): A field to hold geometry information. ID (ID): Oracle's unique identifier Control Section ID (CS_ID): Non unique identifier linking segment to its respective control section. For example, a control section may have numerous geometry segments and each will have the same CS_ID. Control Section Key (CS_KEY): An information rich key containing Region (two digits), Road Number (three digits), Section number (three digits), the Road Type (one character), and direction of travel (one character). Subsection ID (SS_ID): Control Sections are further divided into Subsections. This is the subsection ID field. MI Region (REGION_NO): The Manitoba Infrastructure region the segment is in Regions 1-5. Road Number (ROAD_NO): The road number. Note co-routes will have the lesser highway number. Section Number (SECTION_NO): The section number from the CS_KEY. Road Type (ROAD_TYPE): H = Highway, E = Earth Road, and O= 'Other" road (such as through a national park because the road is not a responsibility of MI.) Road Direction (ROAD_DIRECTION): A = ahead direction on a divided highway (i.e. following the digitizing direction), B = Back direction on a divided highway (i.e. against the digitizing direction, and U= an undivided highway. Start Kilometre (KM) (START_KM): Start KM, is the start of the sub section within a control Section. This is part of the linear referencing method used for dynamic segmentation. End Kilometre (KM) (END_KM): End KM is the end of the sub section within a Control Section. This is part of the linear referencing method used for dynamic segmentation. Length (KM) (LENGTH_KM): End Kilometre minus the Start Kilometre. Subsection Description (SECTION_DESC): A text description of where the subsection starts and ends. Road Type Description (ROAD_TYPE_DESC): An unabbreviated version of Road Type above. Road Direction Description (ROAD_DIRECTION_DESC): An unabbreviated version of Road Direction above. Functional Class (FUNCTIONAL_CLASS): Functional Class: Expressway, Primary Arterial, Secondary Arterial and Collector Divided Status (DIVIDED_STATUS): Highway is divided or undivided. Number of Lanes (LANES): The number of lanes the road has. Median Type (MEDIAN_TYPE): Type of median: Raised Median, Depressed Median, Flush Median, Barrier and No Median. Median Width (m) (MEDIAN_WIDTH): The width of the median, in metres. Row Width (m) (ROW_WIDTH): The total width of the right-of-way in metres. Subgrade Width (m) (SUBGRADE_WIDTH): The width of the earth embankment in metres. Re-grade Year (REGRADE_YEAR): The year the road was last regraded. Re-grade Description (REGRADE_DESCRIPTION): Description of what re-grading was done. Outside Shoulder Type (OUTSIDE_SHLDR_TYPE): Type of outside shoulder: AST, Curbed, Fully Paved, Gravel, No Shoulders and N/A. Outside Shoulder Width (m) (OUTSIDE_SHLDR_WIDTH): The width of the outside shoulder in metres. Outside Paved Width (m) (OUTSIDE_PAVED_WIDTH): The width of the paved surface of the outside shoulder in metres. Inside Shoulder Type (INSIDE_SHLDR_TYPE): Type of inside shoulder: Curbed, Fully Paved, Gravel, No Shoulders and N/A. Inside Shoulder Width (m) (INSIDE_SHLDR_WIDTH): The width of the inside shoulder in metres. Inside Paved Width (m) (INSIDE_PAVED_WIDTH): The width of the paved surface of the inside shoulder in metres. Surface Type (SURFACE_TYPE): The type of surfacing on the road: A Base, AST, Bituminous (Bpm), Bituminous B, Bituminous C, C Base, Concrete, Granular, Reclaimed Asphalt Pavement and Road Mix Surface Width (m) (SURFACE_WIDTH): The surface width is the width of the driving lanes. Surface Depth (mm) (SURFACE_DEPTH): Thickness of the surface layer (mm). Surface Year (SURFACE_YEAR): The year the surface was constructed. Base Layer 1 (BASE_1): 1st subsurface layer. 1 = present, 0 = not present Base Layer 1 Type (BASE_1_TYPE): Material type of 1st subsurface layer of the road structure. Base Layer 1 Depth (mm) (BASE_1_DEPTH): Thickness of 1st subsurface layer of road structure in mm. Base Layer 1 Year (BASE_1_YEAR): Year materials placed or modified for 1st subsurface layer. Base Layer 2 (BASE_2): 2nd subsurface layer. 2 = present, 0 = not present Base Layer 2 Type (BASE_2_TYPE): Material type of 2nd subsurface layer of road structure. Base Layer 2 Depth (mm) (BASE_2_DEPTH): Thickness of 2nd subsurface layer of road structure in mm. Base Layer 2 Year (BASE_2_YEAR): Year materials placed or modified for 2nd subsurface layer. Base Layer 3 (BASE_3): 3rd subsurface layer. 3 = present, 0 = not present Base Layer 3 Type (BASE_3_TYPE): Material type of 3rd subsurface layer of road structure. Base Layer 3 Depth (mm) (BASE_3_DEPTH): Thickness of 3rd subsurface layer of road structure in mm. Base Layer 3 Year (BASE_3_YEAR): Year materials placed or modified for 3rd subsurface layer. Base Layer 4 (BASE_4): 4th subsurface layer. 4 = present, 0 = not present Base Layer 4 Type (BASE_4_TYPE): Material type of 4th subsurface layer of road structure. Base Layer 4 Depth (mm) (BASE_4_DEPTH): Thickness of 4th subsurface layer of road structure in mm. Base Layer 4 Year (BASE_4_YEAR): Year materials placed or modified for 4th subsurface layer. Base Layer 5 (BASE_5): 5th subsurface layer. 5 = present, 0 = not present Base Layer 5 Type (BASE_5_TYPE): Material type of 5th subsurface layer of road structure. Base Layer 5 Depth (mm) (BASE_5_DEPTH): Thickness of 5th subsurface layer of road structure in mm. Base Layer 5 Year (BASE_5_YEAR): Year materials placed or modified for 5th subsurface layer. Base Layer 6 (BASE_6): 6th subsurface layer. 6 = present, 0 = not present Base Layer 6 Type (BASE_6_TYPE): Material type of 6th subsurface layer of road structure. Base Layer 6 Depth (mm) (BASE_6_DEPTH): Thickness of 6th subsurface layer of road structure in mm. Base Layer 6 Year (BASE_6_YEAR): Year materials placed or modified for 6th subsurface layer. Base Layer 7 (BASE_7): 7th subsurface layer. 7 = present, 0 = not present Base Layer 7 Type (BASE_7_TYPE): Material type of 7th subsurface layer of road structure. Base Layer 7 Depth (mm) (BASE_7_DEPTH): Thickness of 7th subsurface layer of road structure in mm. Base Layer 7 Year (BASE_7_YEAR): Year materials placed or modified for 7th subsurface layer. Terrain Type (TERRAIN_TYPE): General terrain conditions: Flat, Rolling and Rugged. Construction Status (CONSTRUCTION_STATUS): Construction completed or carried over. Updated Date (UPDATED_YYYYMMDD): Date the record was updated.