Hourly data collected by Alberta Environment and Parks using Beta-attenuation Particulate Monitors (EBAMs) as part of emergency response monitoring during the 2016 Horse River Wildfire.

Unverified raw hourly air pollutant monitoring and meteorological data collected by the Ministry of Environment and Climate Change Strategy. These data sets contain **air quality data from 2024 to the most recent hourly readings** and **meteorological data from 2023 to the most recent hourly readings** from air quality monitoring stations across B.C, up to the latest hour in Pacific Standard Time (PST). This does not include data originating from Metro Vancouver and Fraser Valley Regional Districts. For current conditions for Metro Vancouver and Fraser Valley Regional Districts please visit https://gis.metrovancouver.org/maps/air/ This data is not quality-assured. Historical quality-assured air data is available here: https://catalogue.data.gov.bc.ca/dataset/77eeadf4-0c19-48bf-a47a-fa9eef01f409 Please subscribe using the following link if you want to receive the updates on the datasets: https://www2.gov.bc.ca/gov/content/environment/air-land-water/air/air-quality/current-air-quality-data __Please click on VIEW resource to access__ __For data files directing to a FTP site, please copy the FTP link to File Explorer (anonymous login), Finder or equivalent, or use a FTP client such as FileZilla to access the FTP link. If using File Explorer, Finder, or equivalent, copy the files requested from the FTP folder to a local location to download.__ ##### Data files are available for: ##### #### Current Air Quality Data: * Air Quality Health Index (Learn more about this index: http://www.env.gov.bc.ca/epd/bcairquality/readings/aqhi-table.xml) * Carbon monoxide (CO) in parts per million (ppm) * Hydrogen sulfide (H2S) and Total reduced sulfur (TRS) in ppb * Nitric oxide (NO) in parts per billion (ppb) * Nitrogen dioxide (NO2) in ppb * Sulfur dioxide (SO2) in ppb * Ground-level ozone (O3) in ppb * PM2.5 (particulate matter with diameter of 2.5 micrometres or less) in micrograms per cubic metre (ug/m3) * PM10 (particulate matter with diameter of 10 micrometres or less) in ug/m3 * THC (total hydrocarbons) in ppm #### Current Meteorological Data: * Air Temperature (TEMP) in degrees Celsius (°C) * Relative Humidity (HUMIDITY) in percent (%) * Wind Speed (WSPD) in meters per second (m/s) * Wind Direction (WDIR) in degrees from true north/azimuth (°) * Precipitation (PRECIP) in millimeters (mm) * Snow depth (SNOW) in centimeters (cm) * Barometric Pressue (PRESSURE) in kilopascals (kPA) or millibars (mb) * Water Vapor Pressure (VAPOUR) in kilopascals (kPA) or millibars (mb) #### Monitoring Locations * Locations of all current and historical air and meteorological stations including Latitude and Longitude

A spatial file of polygons representing the seven "air zones" of British Columbia. Air zones are the basis for monitoring, reporting and taking action on air quality. Air zones are areas that typically exhibit similar air quality characteristics, issues and trends. It is the responsibility of each province and territory to delineate and manage their air zones based on local conditions. The spatial data are provided as a shapefile, geojson, and KML.

This dataset is a locational record of the meteorological input files publically available on Saskatchewan GeoHub that can be used with the Environmental Protection Agency approved Regulatory Model (AERMOD). Each file represents the meteorology over an area of the province while minimizing the influences of local terrain on air flow. Additional attribute information for each location includes coordinates and a link to download the AERMOD data as a zip file. The Air Quality Section of the Ministry of Environment uses air quality modelling to simulate how air pollutants disperse in the ambient atmosphere in order to help manage the air quality in the province. The models are used to estimate the impact of air pollutants emitted from emission sources, and are typically employed to determine whether existing or new proposed industrial facilities are or will be in compliance with the ambient air quality standards outlined in Table 20 of the province's Environmental Code, June 1, 2015 under The Environmental Management and Protection Act, 2010.  The information needed to run dispersion models consists primarily of emissions and meteorological data. Five years (2012-2016) of preprocessed meteorological datasets in an AERMOD ready format is publicly available. This file is contained in the downloadable zipped file. The zipped file contains five files: the SFC and PFL files are the AERMOD ready files required to run AERMOD (i.e., data, sensible heat flux, frictional velocity, potential temperature gradient, vertical velocity, mixing height, monin-obukhov length, surface roughness, Bowen ratio, albedo, scalar wind speed, wind direction, ambient temperature, precipitation, precipitation rate, relative humidity, surface pressure, and total cloud amounts); the DAT file contains the land use information (i.e., Surface roughness, Bowen ratio and albedo) chosen for each month in the SFC file; the KMZ file contains the wind rose for that location which can be used on Google Earth; and the PNG file contains various graphs of monthly or diurnal meteorological distribution (i.e., temperature, wind speed, daytime mixing heights and sensible heat flux, and stability) which can be used to help determine if that location is representative of the area proposed for modelling.  Please note: Since this data is newly developed, it is possible there may be issues with the data as it gets used in more applications. Ongoing changes, edits and updates may be made by the Air Quality Section of the Ministry of Environment. Is is recommended for any future modelling to download the latest version of the input files and not archive any input files on your own server for future use, unless this notification no longer exists. If there are any issues discovered with data in the zipped file, please contact Dennis Fudge at dennis.fudge@gov.sk.ca or at 306-519-7105. Your support will be greatly appreciated.  There may be times you feel that the input files are not representative of the proposed modelling domain due to the surrounding features (i.e., forest/agricultural or rural/urban) being different than those used to generate the input files. If that is the case, the modeler can generate the input modelling files themselves. The relevant files to generate these input files are available upon request. Please contact Dennis Fudge at dennis.fudge@gov.sk.ca or at 306-519-7105. 

Hourly ambient ground-level ozone (O3) data in parts per billion from provincial ambient air quality monitoring stations across Nova Scotia up to the end of 2014.

The Ministry of Environment operates a network of continuous ambient air monitoring stations to measure the concentration of air pollutants across Saskatchewan. This is considered 'raw data' that has not undergone quality control and quality assurance. 'Raw data' is not intended to provide medical or health care advice and should not be used in published documents. For best results download the entire dataset without filtering as a CSV. ‘Date and time’ as displayed is your local time. However, downloaded data is in UTC for ‘Date and time’. Any values of -9999, -999, or 9980 are invalid data. The Ministry of Environment operates a network of continuous ambient air monitoring stations. These stations are part of the National Air Pollution Surveillance (NAPS) network. Continuous ambient air monitoring stations measure the concentration of air pollutants across Saskatchewan. The data is used to:  • track and report on progress for achieving air quality objectives • measure representative pollutant concentrations and determine long-term trends and • provide air quality information to the public Air pollutants typically come from various industrial activity and natural sources, such as mining, oil and gas, agriculture, forest fires, electrical generation, and the transportation sector. Disclaimer: Hourly data contained on this website is automatically updated daily from Saskatchewan Ministry of Environment monitoring stations and is intended for informational purposes only. This is considered ‘raw data’ and may contain errors. 'Raw data' is not intended to provide medical or health care advice and should not be used in published documents. Data integrity and validity may be affected by instrument malfunctions, instrument calibrations or power failures.  For more information please visit the ministry's Air Quality Monitoring page or contact the Ministry of Environment Inquiry Centre: centre.inquiry@gov.sk.ca 1-800-567-4224  

The Ministry of Environment operates a network of continuous ambient air monitoring stations to measure the concentration of air pollutants across Saskatchewan. This is considered 'raw data' that has not undergone quality control and quality assurance. 'Raw data' is not intended to provide medical or health care advice and should not be used in published documents. For best results download the entire dataset without filtering as a CSV. ‘Date and time’ as displayed is your local time. However, downloaded data is in UTC for ‘Date and time’. Any values of -9999, -999, or 9980 are invalid data. The Ministry of Environment operates a network of continuous ambient air monitoring stations. These stations are part of the National Air Pollution Surveillance (NAPS) network. Continuous ambient air monitoring stations measure the concentration of air pollutants across Saskatchewan. The data is used to:  • track and report on progress for achieving air quality objectives • measure representative pollutant concentrations and determine long-term trends and • provide air quality information to the public Air pollutants typically come from various industrial activity and natural sources, such as mining, oil and gas, agriculture, forest fires, electrical generation, and the transportation sector. Disclaimer: Hourly data contained on this website is automatically updated daily from Saskatchewan Ministry of Environment monitoring stations and is intended for informational purposes only. This is considered ‘raw data’ and may contain errors. 'Raw data' is not intended to provide medical or health care advice and should not be used in published documents. Data integrity and validity may be affected by instrument malfunctions, instrument calibrations or power failures.  For more information please visit the ministry's Air Quality Monitoring page or contact the Ministry of Environment Inquiry Centre: centre.inquiry@gov.sk.ca 1-800-567-4224  

The Ministry of Environment operates a network of continuous ambient air monitoring stations to measure the concentration of air pollutants across Saskatchewan. This is considered validated data that has undergone quality control and quality assurance. For best results download the entire dataset without filtering as a CSV. ‘Date and time’ as displayed is your local time. However, downloaded data is in UTC for ‘Date and time’. Any values of -9999, -999, or 9980 are invalid data. Download zip file. The Ministry of Environment operates a network of continuous ambient air monitoring stations. These stations are part of the National Air Pollution Surveillance (NAPS) network. Continuous ambient air monitoring stations measure the concentration of air pollutants across Saskatchewan. The data is used to:  • track and report on progress for achieving air quality objectives • measure representative pollutant concentrations and determine long-term trends and • provide air quality information to the public Air pollutants typically come from various industrial activity and natural sources, such as mining, oil and gas, agriculture, forest fires, electrical generation, and the transportation sector. Disclaimer: Hourly data from the Saskatchewan Ministry of Environment monitoring stations is validated and updated every quarter. This is the most up-to-date and accurate information available. A final annual review occurs in spring where data are subject to change. For more information please visit the ministry's Air Quality Monitoring page or contact the Ministry of Environment Inquiry Centre: centre.inquiry@gov.sk.ca 1-800-567-4224 

The Ministry of Environment operates a network of continuous ambient air monitoring stations to measure the concentration of air pollutants across Saskatchewan. This is considered validated data that has undergone quality control and quality assurance. For best results download the entire dataset without filtering as a CSV. ‘Date and time’ as displayed is your local time. However, downloaded data is in UTC for ‘Date and time’. Any values of -9999, -999, or 9980 are invalid data. Download zip file. The Ministry of Environment operates a network of continuous ambient air monitoring stations. These stations are part of the National Air Pollution Surveillance (NAPS) network. Continuous ambient air monitoring stations measure the concentration of air pollutants across Saskatchewan. The data is used to:  • track and report on progress for achieving air quality objectives • measure representative pollutant concentrations and determine long-term trends and • provide air quality information to the public Air pollutants typically come from various industrial activity and natural sources, such as mining, oil and gas, agriculture, forest fires, electrical generation, and the transportation sector. Disclaimer: Hourly data from the Saskatchewan Ministry of Environment monitoring stations is validated and updated every quarter. This is the most up-to-date and accurate information available. A final annual review occurs in spring where data are subject to change. For more information please visit the ministry's Air Quality Monitoring page or contact the Ministry of Environment Inquiry Centre: centre.inquiry@gov.sk.ca 1-800-567-4224

Environmental Monitoring Stations (EMS) spatial points coverage for the Province by LOCATION TYPES. The following spatial layers reference this as a data source: 1. Environmental Monitoring - All Stations 2. Environmental Monitoring Stations - Air Monitoring (Ambient Air Site) 3. Environmental Monitoring Stations - Air Monitoring (Air Permit) 4. Environmental Monitoring Stations - Water Sites (Water Monitoring) 5. Environmental Monitoring Stations - Water Sites (Water Permits) 6. Environmental Monitoring Stations - Water Sites (Well) 7. Environmental Monitoring Stations - Water Sites (Observation Well) 8. Environmental Monitoring Stations - Water Sites (Spring)